Magicmotorsport FLEX Master – ECU Programming Tool with FlexBox for OBD, Bench, BDM, Boot & JTAG
1.383,12 € - 6.182,77 €
- Master version: edit the read files yourself
- Read, write and update engine and gearbox ECUs via OBD
- FlexBox for bench, BDM, bootloader, JTAG and AUD included
- Replace and clone ECUs, more than 25,000 vehicles according to Magicmotorsport
- Complete cable and adapter set in the FLEX case
- Description
- Jetzt kontaktieren
- Additional information
- Reviews (0)
Description
Magicmotorsport FLEX Master – ECU programming tool with FlexBox for OBD, bench, BDM, bootloader, JTAG and AUD
A faulty engine ECU needs replacing, a gearbox control unit needs cloning or software needs updating – and the customer wants the car back tomorrow. The Magicmotorsport FLEX Master reads and writes most ECUs directly via the OBD port – and as a Master you edit the read files yourself, without going through another tuner. When OBD isn’t enough, the included FlexBox module takes over: bench, BDM, bootloader, JTAG and AUD on the removed ECU, with a complete set of cables and adapters.
A good fit if you …
- replace, clone or update ECUs in your workshop
- work both via OBD and on the bench with removed ECUs
- want to edit the read files yourself and serve your own customers or Slave tools
- work on engine and gearbox ECUs from many manufacturers
Probably not for you if you …
- prefer to leave file editing to an experienced tuner – the FLEX Slave with Master support is designed for that
- only read fault codes and do service resets – a diagnostic tool is enough for that
- want to programme keys and immobilisers – dedicated immobiliser programmers are available for that
Master: edit files yourself
With a Master tool, the read files are not encrypted. You open them in your editing software, adjust them yourself and then write them back to the ECU with the FLEX. As a Master tuner, you can also link your own Slave tools to your account and edit their files.
Typical jobs with the FLEX
- ECU replacementTransfer data from the old to the new engine or gearbox control unit
- CloningDuplicate faulty ECUs – Magicmotorsport’s list shows which are supported
- Software updateUpdate ECU software via OBD
- BackupRead and save the original data before working on the ECU
- RemappingRead and write software for engine and gearbox calibration
OBD and FlexBox
- OBDReprogramme, update or modify most engine ECUs directly via the diagnostic socket
- BenchConnect the removed ECU on the bench and read or write it
- BDM, JTAG, AUDDirect access to the processor when bench and OBD aren’t enough
- BootloaderProgramming via the ECU’s boot mode
- Error detectionConnection and communication errors are detected while reading and writing
According to Magicmotorsport, more than 25,000 vehicles are supported. Software, protocols and updates run via your internet connection and an annual subscription.
Vehicle lists and guides
What’s in the box
| FLX1.1 | FLEX base module |
|---|---|
| FLX1.9 | FlexBox module |
| FLX2.10 | OBD cable FLEX to CAN/K-Line (red) |
| FLX2.11 | OBD cable FLEX to ENET (green) |
| FLX3.3 | Cable FlexBox port C to NEC 7F00 XX |
| FLX3.4 | Cable FlexBox port D to BDM MPC5xx |
| FLX3.9 | USB 2.0 cable AM-BM, 1.8 m |
| FLX4.1 | FlexBox port E 40-pin adapter for FLK35 |
| FLX9.1 | FLEX and FlexBox diagnostic adapter |
| FLK35 | Cabling kit with colour-coded FLX3.5 wiring harness |
| FLK42 | Adapter kit with 6 pin adapters for FLX35 |
| FLK49 | Switch-mode power supply with plugs |
| FLX8.10 | FLEX case |
Good to know
Modifying engine or gearbox software can affect the vehicle’s type approval, warranty and insurance cover. For road use, it is only permitted with the appropriate registration or approval.
Always back up the original data before writing and connect the vehicle to a battery charger or power supply. According to Magicmotorsport, the FLEX comes with a limited lifetime warranty, and technical support is included.
Is your ECU supported?
Tell us the vehicle, engine and ECU – we’ll check support before you buy.
Questions we often get
What’s the difference from the FLEX Slave?
Both read and write ECUs. With the Master you edit the files yourself. With the Slave, the files are encrypted and edited by the Master tuner the tool is linked to.
Is the FlexBox included?
Yes, the FLX1.9 FlexBox module and the cables for ports C, D and E are included. With them you work in bench, BDM, bootloader, JTAG and AUD mode.
Do I need an internet connection?
Yes, the FLEX software accesses protocols, updates and services via the internet.
Which ECUs are supported?
According to Magicmotorsport, more than 25,000 vehicles. You’ll find the full list and the clonable ECUs via the links above – or just ask us.
Do I need a subscription?
For new protocols and updates, the FLEX runs on an annual subscription that you can renew with us.
Additional information
| Weight | 2 kg |
|---|
Be the first to review “Magicmotorsport FLEX Master – ECU Programming Tool with FlexBox for OBD, Bench, BDM, Boot & JTAG”
You must be logged in to post a review.
Reviews
There are no reviews yet.